Products
-
Hydraulic brake hose assembly
SAE J1401 DOT Hydraulic Brake Hose Assembly with competitive prices
Brake hose assembly is the very important part of vehicles brake system.
There are advanced production equipment and testing equipment in our company to ensure the quality of the products. -
Brake Hose Assembly (standard by SAE J1401)
Brake hose assembly is the very important part of vehicles’ brake system. There are advanced production equipment and testing equipment in our company to ensure the quality of the products. The brake hoses manufactured by us has the features of bursting strength, low volumetric expansion, excellent weather resistance and so on. The products are strictly in compliance with GB16897-2010, SAE J1401. In addition, we have been applied for patents for many products. -
Air Brake Hose
1. Hose structure: three layers. Inner rubber layer+ braided layer+ outer rubber layer
2. Material: NBR/CR + Reinforced layers(PET)
3. Package: 50m~100m/roll
4. Certification: DOT/IATF16949:2016/CQC
5. Standard: SAE J1402/GB16897 -
power steering hose( low pressure)
Materail: CSM, chinlon braided
Resistance to high temprature & impulse, ozone and aging. Meet with SAE J189 standard.
Apply in power steering system of various car, multi-function business car. -
Hydraulic Brake Metal Fittings
Brass fitting
Plated— End fittgings
Color/white zinc plated fitting
Chrome plated fitting
Thread standards— End fittings -
Vacuum Brake Hose (standard by GB16897-2010)
Inner rubber is NBR
Reinforced layer thread: braided PET
Out rubber is CR
Features:
The change rate of the outside diameter is low under working pressure, even in bending. The stickiness of layers is very good. -
Power steering hose (high pressure)
Material: CSM, Rubber, chinlon braided
Reduce noise, decrease vibration, resistance to high pressure,
Impulse&ozene, meet with SAE J188.
Apply in power steering system of various cars, multi-function business car, light truck etc. -
Hydraulic Brake Hose
1. Hose structure: five layers. Inner rubber layer+ braided layer+ middle rubber layer+ braided layer+ outer rubber layer
2. Material: EPDM+ Reinforced layers(PET or PVA)
3. Package: 250m/300m/roll
4. Certification: DOT/IATF16949:2016/CQC -
Brake Bundy Tube
The double layer welded pipe has good leakage resistance, high blasting performance, excellent reprocessing, outstanding anti-fatigue performance, high internal cleanliness, accurate geometry and so on. performance parameter: tensile strength Rm≥ 290Mpa Yield strength: Rel≥180Mpa Percentage elongation after fracture: A ≥ 25% The cleanliness of inner wall: Residue≤ 0.16g/㎡. -
Nylon Air Brake Hose
1.Hose Material: PA11
2.Hose color: BLACK/COLORED STRIP
3. Package: 50m~100m/roll
4. Certification: CQC
5. Standard: GB16897-2010 -
Hydrauic Brake Tube Assembly Yb/T4164-2007
The double layer welded pipe has good leakage resistance, high blasting performance,excellent -
Braided Brake Hose
1) Wide temperature use range: -200~+250 centigrade;
2) Resistance to almost all corrosive chemicals;
3) Antistick properties;
4) Very low coefficient of friction;
5) Non flammable;
6) Excellent electrical properties;
7) Good mechanical properties;
