Factory wholesale Submersible Pump Hose Fittings - Power steering hose (high pressure) – Jinxing
Factory wholesale Submersible Pump Hose Fittings - Power steering hose (high pressure) – Jinxing Detail:
Material: CSM, Rubber, chinlon braided
Reduce noise, decrease vibration, resistance to high pressure,
Impulse&ozene, meet with SAE J188.
Apply in power steering system of various cars, multi-function business car, light truck etc.
Common sense for selection and maintenance:
Please kindly note the following points when selecting the brake hoses:
1 Please select the brake hoses produced by the regular manufacturer and the hoses with the CCC mark, name of manufacturer and the production date.
2 Please choose the matching brake hose assembly according to the different models of Automobiles. Take care of the symbol on the hose body. If the tube letters “HR” represents the standard amount of expansion hydraulic hose; “HL” indicates a low amount of expansion hydraulic hose; “A” indicates that the hose used for pneumatic braking system; “V” means hose for vacuum brake system.
3 Please do not use the hoses which surface is with cracking, corrosion, bubbles and some other unqualified hoses.
4 Brake hose is the key important part to ensure the safety of vehicles traveling. So, it should be paid more special attention to the usual maintenance and regular checks to keep the hose surface cleaning and avoid corroding.
5 Please avoid the pull force.
6 Please kindly check the fittings of the brake hoses whether loose or not.
7 Long-term use of the brake hose, if there is aging, closed not tight or scratched, it should be promptly replaced.
| Test Item | Test Condition | Requirements | 9.8× 18.3 | 9.8× 19.8 |
| Impulse Test | Oil temperature 135 º C Ambient temperature 135± 6 º C Cycle rate 30~40/min |
225, 000 Cycle without failure |
> 230, 000cycles | > 230, 000cycles |
| Tensile Test | > 5337.9N | > 7000N | > 7000N | |
| Low Temprature Flexbility |
The hose shall be bent through 180 º C on 8 times OD mandrel after the temprature of -40± 3º C for 24h | Hose shall not fracture or show any cracks, break in the tube or cover. | OK | OK |
| Adhension | At the speed of 25mm/min | 44.48N/Inch | 112N/Inch | 126N/Inch |
| Bursting Strength | 13.8 Mpa× 2min; Pressure Rate: 172.5+/-69Mpa |
> 41.4Mpa | 61Mpa | 62Mpa |
| Ozone Resistance | In the proportion of 50 pphm± 5 ozone in the air by volume for 70~72h at the temprature of 40 º C± 3 º C | The cover show no cracking at 7× magnification. | OK | OK |
| Volumetric Expansion | 0~8.9 Mpa for 30s | Type 1 3~8 CC/FT | 5.4 CC/FT | 6.0 CC/FT |
| Length Change | 0~10.3 Mpa | Type 1 +2%~ -5% | +1% | +1% |
Product detail pictures:
Related Product Guide:
The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Factory wholesale Submersible Pump Hose Fittings - Power steering hose (high pressure) – Jinxing , The product will supply to all over the world, such as: Slovenia, Holland, Puerto Rico, Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have now the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.
By Zoe from Armenia - 2017.06.22 12:49
It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
By Elva from European - 2017.12.31 14:53
