OEM/ODM Manufacturer Double Banjo Fitting - Power steering hose (high pressure) – Jinxing
OEM/ODM Manufacturer Double Banjo Fitting - Power steering hose (high pressure) – Jinxing Detail:
Material: CSM, Rubber, chinlon braided
Reduce noise, decrease vibration, resistance to high pressure,
Impulse&ozene, meet with SAE J188.
Apply in power steering system of various cars, multi-function business car, light truck etc.
Common sense for selection and maintenance:
Please kindly note the following points when selecting the brake hoses:
1 Please select the brake hoses produced by the regular manufacturer and the hoses with the CCC mark, name of manufacturer and the production date.
2 Please choose the matching brake hose assembly according to the different models of Automobiles. Take care of the symbol on the hose body. If the tube letters “HR” represents the standard amount of expansion hydraulic hose; “HL” indicates a low amount of expansion hydraulic hose; “A” indicates that the hose used for pneumatic braking system; “V” means hose for vacuum brake system.
3 Please do not use the hoses which surface is with cracking, corrosion, bubbles and some other unqualified hoses.
4 Brake hose is the key important part to ensure the safety of vehicles traveling. So, it should be paid more special attention to the usual maintenance and regular checks to keep the hose surface cleaning and avoid corroding.
5 Please avoid the pull force.
6 Please kindly check the fittings of the brake hoses whether loose or not.
7 Long-term use of the brake hose, if there is aging, closed not tight or scratched, it should be promptly replaced.
| Test Item | Test Condition | Requirements | 9.8× 18.3 | 9.8× 19.8 |
| Impulse Test | Oil temperature 135 º C Ambient temperature 135± 6 º C Cycle rate 30~40/min |
225, 000 Cycle without failure |
> 230, 000cycles | > 230, 000cycles |
| Tensile Test | > 5337.9N | > 7000N | > 7000N | |
| Low Temprature Flexbility |
The hose shall be bent through 180 º C on 8 times OD mandrel after the temprature of -40± 3º C for 24h | Hose shall not fracture or show any cracks, break in the tube or cover. | OK | OK |
| Adhension | At the speed of 25mm/min | 44.48N/Inch | 112N/Inch | 126N/Inch |
| Bursting Strength | 13.8 Mpa× 2min; Pressure Rate: 172.5+/-69Mpa |
> 41.4Mpa | 61Mpa | 62Mpa |
| Ozone Resistance | In the proportion of 50 pphm± 5 ozone in the air by volume for 70~72h at the temprature of 40 º C± 3 º C | The cover show no cracking at 7× magnification. | OK | OK |
| Volumetric Expansion | 0~8.9 Mpa for 30s | Type 1 3~8 CC/FT | 5.4 CC/FT | 6.0 CC/FT |
| Length Change | 0~10.3 Mpa | Type 1 +2%~ -5% | +1% | +1% |
Product detail pictures:
Related Product Guide:
To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for OEM/ODM Manufacturer Double Banjo Fitting - Power steering hose (high pressure) – Jinxing , The product will supply to all over the world, such as: Cologne, Riyadh, Slovakia, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in beauty and other industries. Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
By Nana from San Diego - 2017.12.31 14:53
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Agustin from Senegal - 2017.05.21 12:31
