Manufacturer of E Line Brakes - Power steering hose (high pressure) – Jinxing
Manufacturer of E Line Brakes - Power steering hose (high pressure) – Jinxing Detail:
Material: CSM, Rubber, chinlon braided
Reduce noise, decrease vibration, resistance to high pressure,
Impulse&ozene, meet with SAE J188.
Apply in power steering system of various cars, multi-function business car, light truck etc.
Common sense for selection and maintenance:
Please kindly note the following points when selecting the brake hoses:
1 Please select the brake hoses produced by the regular manufacturer and the hoses with the CCC mark, name of manufacturer and the production date.
2 Please choose the matching brake hose assembly according to the different models of Automobiles. Take care of the symbol on the hose body. If the tube letters “HR” represents the standard amount of expansion hydraulic hose; “HL” indicates a low amount of expansion hydraulic hose; “A” indicates that the hose used for pneumatic braking system; “V” means hose for vacuum brake system.
3 Please do not use the hoses which surface is with cracking, corrosion, bubbles and some other unqualified hoses.
4 Brake hose is the key important part to ensure the safety of vehicles traveling. So, it should be paid more special attention to the usual maintenance and regular checks to keep the hose surface cleaning and avoid corroding.
5 Please avoid the pull force.
6 Please kindly check the fittings of the brake hoses whether loose or not.
7 Long-term use of the brake hose, if there is aging, closed not tight or scratched, it should be promptly replaced.
| Test Item | Test Condition | Requirements | 9.8× 18.3 | 9.8× 19.8 |
| Impulse Test | Oil temperature 135 º C Ambient temperature 135± 6 º C Cycle rate 30~40/min |
225, 000 Cycle without failure |
> 230, 000cycles | > 230, 000cycles |
| Tensile Test | > 5337.9N | > 7000N | > 7000N | |
| Low Temprature Flexbility |
The hose shall be bent through 180 º C on 8 times OD mandrel after the temprature of -40± 3º C for 24h | Hose shall not fracture or show any cracks, break in the tube or cover. | OK | OK |
| Adhension | At the speed of 25mm/min | 44.48N/Inch | 112N/Inch | 126N/Inch |
| Bursting Strength | 13.8 Mpa× 2min; Pressure Rate: 172.5+/-69Mpa |
> 41.4Mpa | 61Mpa | 62Mpa |
| Ozone Resistance | In the proportion of 50 pphm± 5 ozone in the air by volume for 70~72h at the temprature of 40 º C± 3 º C | The cover show no cracking at 7× magnification. | OK | OK |
| Volumetric Expansion | 0~8.9 Mpa for 30s | Type 1 3~8 CC/FT | 5.4 CC/FT | 6.0 CC/FT |
| Length Change | 0~10.3 Mpa | Type 1 +2%~ -5% | +1% | +1% |
Product detail pictures:
Related Product Guide:
We are convinced that with joint efforts, the business between us will bring us mutual benefits. We can assure you product quality and competitive price for Manufacturer of E Line Brakes - Power steering hose (high pressure) – Jinxing , The product will supply to all over the world, such as: Belarus, Belgium, Algeria, We will do our utmost to cooperate & satisfied with you relying on top-grade quality and competitive price and best after service ,sincerely look forward to cooperating with you and make achievements in the future!
By Julia from Spain - 2017.04.28 15:45
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Mandy from Australia - 2018.02.04 14:13
