Factory making Pneumatic Air Hose Fittings - Hydraulic brake hose assembly – Jinxing

Short Description:

Product Detail

Product Tags

Feedback (2)

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, belief the very first and management the advanced" for Retractable Air Line, Brass Hose Tail, Flexible Dryer Hose, We warmly welcome clients from all around the world for almost any sort of cooperation with us to build a mutual advantage potential. We've been devoting ourselves wholeheartedly to supply consumers the very best company.

Factory making Pneumatic Air Hose Fittings - Hydraulic brake hose assembly – Jinxing Detail:

SAE J1401 DOT Hydraulic Brake Hose Assembly with competitive prices
Brake hose assembly is the very important part of vehicles brake system.
There are advanced production equipment and testing equipment in our company to ensure the quality of the products.
The brake hoses manufactured by us has the features of bursting strength, low volumetric expansion, excellent weather resistance and so on. The products are strictly in compliance with GB16897-2010, SAE J1401.
Material: EPDM, polyester thread
Feature: Low moisture permeation, extended service life, minimal volume expansion, excellent heat and ozone resistance.
Hydraulic brake hose: Cars, motorcycles, light trucks and other vehicles for hydraulic brake system.

The tests applied to our brake hose assemblies are:
100% PRESSURE PROOF TEST
ID CONSTRICTION TEST WITH BENT THE FITTING
EXPANSION TEST
BURST TEST
WHIP TEST
TENSILE TEST
WATER ABSORPTION TEST
LOW TEMPERATURE TEST
BRAKE FLUID COMPATIBILITY TEST
OZONE TEST
IMPULSE TEST
DYNAMIC OZONE TESTS

No.	Test Items		Standard Specification	Test Result
1	100%Pressure Test		28MPa, Hold 120 Sec.	OK
2	Internal Channel Fluent Volume		≥ Ф2.03mm	OK
3	VolumetricExpansion	6.9 MPa	≤1.08 mL/m	0.45	OK
				0.43
				0.44
				0.43
		10.3 MPa	≤1.38 mL/m	0.61	OK
				0.58
				0.59
				0.57
	Burst Test	28MPa, Hold 120 Sec.	No Break	No Break	OK

4

		Minimum Burst Pressure	≥49.0 MPa,No Burst	60MPa,No Burst	OK
5	Whip Test		≥35H ,No Break	No Break	OK
6	Tensile Test		≥1446N,Hose No Break, Joint No Pull-out	1600N,No Break No Pull-out	OK
7	Low Temperature Resistance		-40+1℃, 72hrs,No breakage, No cracks	No Cracks	OK
8	Ozone Test		50+5ppm , 40℃+2℃, 72hrs,No breakage, No cracks	No Cracks	OK
9	Salt Spray Test		24H,No Base Metal Corrosion	No Base Metal Corrosion	OK

Product detail pictures:

Related Product Guide:

The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme for Factory making Pneumatic Air Hose Fittings - Hydraulic brake hose assembly – Jinxing , The product will supply to all over the world, such as: Niger, Ecuador, Moscow, Our monthly output is more than 5000pcs. We have set up a strict quality control system. Please feel free to contact us for further information. We hope that we can establish long-term business relationships with you and carry out business on a mutually beneficial basis. We are and will be always trying our best to serve you.

Flexible Intake Hose

Performance Brake Lines

Preformed Brake Lines

Reinforced Flexible Hose

Truck Air Brake Hose Fittings

Truck Parking Brake

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.